Photo to printable puzzle project

Make a custom 3D printed puzzle from one photo.

Upload a photo, crop it freely, pick your filament colors and puzzle size - from a 100 mm mini to over a meter wide - and download a ready-to-print 3MF with real interlocking jigsaw cuts. Works with Bambu Studio, OrcaSlicer and Creality Print.

Start creating

Or scroll down to see why makers already use this puzzle workflow.

New generation

Universal Puzzle: any photo, any size, real jigsaw cuts.

Free crop - any proportions, sizes from Mini to Ultra (250 mm)
Real interlocking jigsaw knobs, print-safe at every size
Pick the number of pieces - the grid adapts to your photo
Optional display frame with a 30° stand, printed on a second plate
Start free - 2 generations a month, no card needed

Try the Universal Puzzle

Auto Plate Split

Bigger than your build plate. On purpose.

Pick your printer, from an A1 mini to an H2, and go up to 1.2 meters wide. TanskyLab splits the puzzle across build plates automatically, so a poster-size photo prints in parts on a small printer and assembles into one piece.

Choose your bed: from an A1 mini (180 mm) up to an H2, or a custom size
One 3MF, plates laid out like in Bambu Studio, prime-tower safe
A printable assembly map so the parts snap together right
Works today - the jigsaw itself is the joint, no glue or pins

Try Auto Plate Split

A large photo puzzle printed in parts on a small Bambu printer, one section on the plate and the rest assembled beside it

180 mm bed1.2 m puzzle

Proven on MakerWorld

A community-tested puzzle workflow, rebuilt to be simpler.

The original customizable puzzle collection has thousands of likes, saves, downloads, comments, prints, and boosts across multiple MakerWorld listings. TanskyLab turns that workflow into a guided web tool that generates a complete Bambu Studio project file.

Made for gifts

Turn a photo into a printable 100 piece puzzle project for birthdays, family moments, and one-of-a-kind presents.

Works with Bambu Studio, OrcaSlicer & Creality Print

One 3MF project with the puzzle relief, filament colors and layer changes already set up - open it in Bambu Studio, OrcaSlicer or Creality Print and slice. Bambu Lab, Creality, Voron and most modern printers are covered.

No extra software

Upload, crop, choose colors, tune the preview, and download the file without manually replacing STLs.

Print times

How long does a puzzle take to print?

Size	Fast	Balanced	Quality
Mini 100 mm · ~~56 pcs pcs	~1.5 h ~10 g filament	~2 h ~15 g filament	~2.5 h ~15 g filament
Small 140 mm · ~~80 pcs pcs	~2.5 h ~20 g filament	~4 h ~25 g filament	~4.5 h ~25 g filament
Medium 180 mm · ~~143 pcs pcs	~4 h ~25 g filament	~6.5 h ~40 g filament	~7 h ~45 g filament
Large 210 mm · ~~180 pcs pcs	~5.5 h ~35 g filament	~8.5 h ~55 g filament	~9 h ~55 g filament
Ultra 250 mm · ~~304 pcs pcs	~8 h ~50 g filament	~12 h ~80 g filament	~12.5 h ~80 g filament

Size

Fast

Balanced

Quality

Mini

100 mm · ~~56 pcs pcs

~1.5 h

~10 g filament

~2 h

~15 g filament

~2.5 h

~15 g filament

Small

140 mm · ~~80 pcs pcs

~2.5 h

~20 g filament

~4 h

~25 g filament

~4.5 h

~25 g filament

Medium

180 mm · ~~143 pcs pcs

~4 h

~25 g filament

~6.5 h

~40 g filament

~7 h

~45 g filament

Large

210 mm · ~~180 pcs pcs

~5.5 h

~35 g filament

~8.5 h

~55 g filament

~9 h

~55 g filament

Ultra

250 mm · ~~304 pcs pcs

~8 h

~50 g filament

~12 h

~80 g filament

~12.5 h

~80 g filament

Measured on a Bambu Lab P1S with 4 filament colors. Every photo prints differently - aspect ratio, colors and settings all shift the time, so treat these as averages: real times can vary by about ±30%. Display frame: about +2 h. Small prints on an A1 mini in under 3 h. Even Ultra uses about $2 of filament.

Plans